|
 Super
Grip Adhesive- Always
do a skin test before application (See skin
test instructions safety sheet). For best results,
wash application area with soap and water to remove any oils
on the skin. Apply to dry skin. Shake adhesive bottle before
using. Place clean finger on top of dauber or use a cotton
swab. Place very little adhesive on skin where you want the
eyebrows positioned. Spread evenly until smooth and clear.
Wait a few minutes until adhesive is tacky to the touch. Place
eyebrows in position. |
| Adhese-Release
- Place a small amount of Adhese-Release on a cotton swab.
Gently lift up the corner of the eyebrow, starting at the
nose. Place small amount of Adhese-Release on corner of lace.
Wait two minutes, and then gently lift up the brow from nose
to ear. Adhes-Release can be used to remove adhesive from
your skin and the base of the eyebrows. Use with cotton swab.
Wash skin with soap and water afterward. Keep this solution
out of eyes. |
| Skin
cleaner - Do not use the Skin Cleaner on The NaturalBrow®.
This product is oil-based, and can be used to remove the adhesive
from the skin. After you take eyebrows off, put a small amount
of skin cleaner on a cotton swab. Dab on skin where needed
and always clean with soap and water afterward. Skin should
be completely oil free before you apply the eyebrows again.
Keep this solution out of eyes. |
| Proper
Placement of The Eyebrow - See detailed
instructions for the proper positioning of The NaturalBrow®. |
No
warranty, expressed or implied, is made to any user. Cautionary
statements and instructions essential to safe use must be followed
at all times with no exceptions. A predisposition skin test must
be performed before every adhesive application. Any person using
eyebrow products must follow these directions. It is the responsibility
of the purchaser or user of this material (adhesives and solutions)
to ensure that it is properly and safely used. Keep all products
out of eyes and away from children. No international sales.
|
